Pioneer DJM-700-K, DJM-700-S operating instructions Program Change, Snapshot, Midi ON/OFF

MIDI SETTINGS

PROGRAM CHANGE

MSB								LSB
0	0	EFFSEL2	EFFSEL1	EFFSEL0	EFFCH2		EFFCH1	EFFCH0
• EFFECT SEL			BEAT
EFFSEL2		EFFSEL1		EFFSEL0
0		0		1		DELAY
0		1		0		ECHO
1		0		0		TRANS
1		1		0		FILTER
1		0		1		FLANGER
1		1		1		PHASER
0		1		1		REVERB
—		—		—		ROBOT
—		—		—		CRUSH
—		—		—		ROLL
—		—		—		REV ROLL
—		—		—		UP ROLL
—		—		—		DWNROLL
—		—		—		SND/RTN
0		0		1		1
0		1		0		2
0		1		1		3
1		0		0		4
1		0		1		MIC
1		1		0		CF.A
1		1		1		CF.B
—		—		—		MASTER

SNAPSHOT

Once the DJM-700-S/DJM-700-K is setup with parameters for a given purpose, that set of parameters can be recorded as a snapshot. When snapshot of the current status is recorded, all messages for control change and program change are transmitted. Hold the MIDI START/STOP button depressed to send the snapshot.

MIDI ON/OFF

Use the MIDI ON/OFF button to control whether the MIDI control signal is generated. The default condition is MIDI OFF. Even when MIDI OFF is selected, however, timing clock and snap shot functions are supported.

24

En