Pioneer DJM-700-S, DJM-700-K Manual Filter Operation, Effect Frequency Filter Operation

EFFECT FUNCTIONS

MANUAL FILTER OPERATION

1MANUAL FILTER

The filter frequency is shifted, resulting in strong changes to the tone.

Rotating the dial to the right produces high-pass filter effects, while rotating the dial to the left produces low-pass filter effects.

Low-pass filter	High-pass filter
FREQUENCY
LPF	HPF

FrequencyFrequency

1 FILTER

3 FREQUENCY

2

The manual effecter is linked to the FREQUENCY dial. The output sounds of the manual effecter become the input sounds for the beat effect.

•When the beat effect type is set to ROLL, REVERSE ROLL, UP ROLL, or DOWN ROLL, the beat effect’s output sound becomes the input sound for the manual effecter.

1Press the FILTER button so that it flashes.

•Confirm that the FILTER button flashes steadily.

•When it lights, press the button so that it flashes. Each time the button is pressed, it alternates between flashing and lighting steadily.

•When power is first turned ON, defaults to steadily lighted.

2Use the effect channel select switch to choose the channel to which you wish to apply the effects.

•The name of the selected channel will appear in the display’s channel name section.

•When [MIC] is selected, the effect will be applied to both microphone 1 and microphone 2.

3Use the FREQUENCY dial to adjust the filter’s cutoff frequency.

•Rotate counterclockwise to apply a low-pass filter.

•Rotate clockwise to apply a high-pass filter.

EFFECT FREQUENCY FILTER OPERATION

1 Effect frequency filter

Sets the filter’s cutoff frequency, allowing the beat effect to be applied to a desired frequency band alone.

Through		Through	English
FREQUENCY
LPF	HPF	Frequency
Frequency
Beat effect		Beat effect

2 FILTER

3 FREQUENCY

The effect frequency filter is linked to the FREQUENCY dial. The beat effect is applied only to the selected frequency band.

•The function is not supported when SEND/RETURN is selected as the type of beat effect.

1Press the FILTER button so that it lights.

•Confirm that the FILTER button lights steadily.

•When flashing, press the button so that it lights. Each time the button is pressed, it alternates between flashing and lighting steadily.

•When power is first turned ON, defaults to steadily lighted.

2Operate the beat effect.

•For details, see page 18.

3Use the FREQUENCY dial to select the frequency to which you wish to apply the beat effect.

•Rotate counterclockwise to apply the effect to low-range sounds only. High-frequency sounds are set to through.

•Rotate clockwise to apply the effect to high-range sounds only. Low-frequency sounds are set to through.

19

En