Adjusts the sound level output from the [MIC1] channel.
2MIC2 LEVEL control (page 15)Adjusts the sound level output from the [MIC2] channel.
3EQ (HI, LOW) controls (page 15)These adjust the tone quality of the [MIC1] and [MIC2] channels.
4OFF, ON, TALK OVER selector switch (page 15)Turns the microphone on/off.
5SOUND COLOR FX buttons (page 16)These turn the SOUND COLOR FX effects on/off.
6FADER START (1, 2, 3, 4) buttons (page 14)These turn the fader start function on/off.
7MONO SPLIT, STEREO selector switch (page 14)Switches how the monitor sound output from the headphones is distributed.
8MIXING control (page 14)This adjusts the monitor volume balance of the sound of channels for which the [CUE] button is pressed and the sound of the [MASTER] channel.
9LEVEL control (page 14)Adjusts the sound level output from the headphones.
ACD/LINE, PHONO, LINE, USB */* selector switch (page 14)Selects the input source of each channel from the components connected to this unit.
BChannel Level Indicator (page 14)Displays the sound level of the respective channels before passing through the channel faders.
CTRIM control (page 14)Adjusts the level of audio signals input in each channel.
DEQ/ISO (HI, MID, LOW) controls (page 14)These adjust the sound quality of the respective channels.
ECOLOR control (page 16)This changes the parameters of the SOUND COLOR FX of the different channels.
FBEAT button (page 16)When the button is pressed while SOUND COLOR FX is turned on, the effect sound is associated to the beat (change in volume) of the currently playing track.
GCUE button (page 14)Presses the [CUE] button(s) for the channel(s) you want to monitor.
HChannel Fader (page 14)Adjusts the level of audio signals output in each channel.
ICROSS FADER ASSIGN (A, THRU, B) selector switch (page 14)Sets the output destination of each channel to [A] or [B].
JCrossfader (page 14)Outputs audio signals assigned by the crossfader assign switch corresponding to the curve characteristics selected by [CROSS FADER] (Crossfader Curve Selector Switch).
KMASTER LEVEL control (page 14)Adjusts the sound level output from the [MASTER] channel.
LMaster Level Indicator (page 14)Displays the sound level output from the [MASTER] channel.
MBALANCE control (page 15)Adjusts the left/right balance of the sound output from the [MASTER1] terminals, etc.
Switches the sound output from the [MASTER1] terminals, etc., between monaural and stereo.
OBOOTH MONITOR control (page 15)Adjusts the level of audio signals output from the [BOOTH] terminal.
PEQ CURVE (ISOLATOR, EQ) selector switch (page 14)Switches the function of the [EQ/ISO (HI, MID, LOW)] controls.
QCH FADER (
, 
, 
) selector switch (page 14)Switches the channel fader’s curve characteristics.
RCROSS FADER (
, 
,
) selector switch (page 14)This switches the crossfader curve characteristics.
SON/OFF button (page 17)Switches the MIDI function on and off.
TSTART/STOP button (page 17)Sends the MIDI start/MIDI stop signals.
USETUP (WAKE UP) button (page 23)—SETUP: Displays the [USER SETUP] or [CLUB SETUP] screen.
—WAKE UP: Cancels the auto standby mode.
VMain unit displayWBEAT c, d buttons (page 16)Set the beat fraction for synchronizing the effect sound.
XTAP (ENTER) button—TAP: When the BPM measurement mode is set to [TAP], the BPM is input manually by tapping the button with a finger (page 16).
—ENTER: Used to change this unit’s settings (page 23).
YAUTO/TAP button (page 16)Switches the BPM measurement mode.
ZDELAY, ECHO, UP ECHO, SPIRAL, REVERB, TRANS, FILTER, FLANGER, PHASER, ROBOT, SLIP ROLL, ROLL, REV ROLL, SND/RTN selector switch (page 16)
Switches the BEAT EFFECT effect type.
A1, 2, 3, 4, MIC, CF.A, CF.B, MASTER selector switch (page 16)Switches the channel to which the BEAT EFFECT is to be applied.
BTIME control (page 16)Adjusts the BEAT EFFECT’s time parameter.
CLEVEL/DEPTH control (page 16)Adjusts the BEAT EFFECT’s quantitative parameter.
DON/OFF button (page 16)Turns the BEAT EFFECT function on/off.
Do not pull on the channel fader and crossfader knobs with excessive force. The knobs have a structure by which they cannot be pulled off easily. Pulling the knobs strongly may result in damaging the unit.
English
En 13