Pioneer DJM-850-K, DJM-850-S, DJM-850-W TRANS1, ROBOT1, SPIRAL1, REVERB1, FILTER1, PHASER1, FLANGER1

SPIRAL1 2

This function adds a reverberation effect to the input sound.

When the delay time is changed, the pitch changes simultaneously.

			Input sound turned off
			Fade-out
				Time
	1 beat
BEAT c, d buttons		Use these to set a time delay of 1/8 – 16/1 with
(parameter 1)		respect to the time of one beat of the BPM.
TIME control (parameter 2)		Use this to set the delay time.
		10 to 4000 (ms)
LEVEL/DEPTH control		Use this to set the balance between the original
		sound and the effect sound and to set the quantita-
(parameter 3)
		tive parameter.

REVERB1 2

This function adds a reverberation effect to the input sound.

Direct sound Early reflected sound

Level Reverberations

1%

	Time
100%
BEAT c, d buttons	Use these to set the extent of the reverberation
(parameter 1)	effect, from 1 – 100 %.
TIME control (parameter 2)	Use this to set the degree of the reverb effect.
	1 – 100 (%)
	Use this to set the balance between the original
LEVEL/DEPTH control	sound and the effect sound and to set the cut-off
(parameter 3)	frequency of the filter through which the effect
	sound passes.

TRANS1

The sound is cut according to the beat fraction set with the [BEAT c, d] buttons.

		Cut		Cut
	1/1 beat				Time
BEAT c, d buttons			Use these to set a cut time of 1/16 – 16/1 with
(parameter 1)			respect to the time of one beat of the BPM.
TIME control (parameter 2)			Use this to set the effect time.
			10 to 16000 (ms)
LEVEL/DEPTH control			Sets the balance between the original sound and the
(parameter 3)			effect sound.

FILTER1

The filter’s cutoff frequency changes according to the beat fraction set with the [BEAT c, d] buttons.

Frequency

BEAT c, d buttons	Use these to set the cycle for moving the cut-off
	frequency as a time of 1/4 – 64/1 with respect to the
(parameter 1)
	time of one beat of the BPM.
	Use this to set the cycle at which the cut-off fre-
TIME control (parameter 2)	quency is moved.
	10 to 32000 (ms)
LEVEL/DEPTH control	The further the control is turned clockwise, the more
(parameter 3)	the effect is stressed.

FLANGER1

A 1-cycle flanger effect is produced according to the beat fraction set with the [BEAT c, d] buttons.

Short delay

			Time
	Cycle
BEAT c, d buttons		Use these to set the 1/4 – 64/1 effect time with
(parameter 1)		respect to the time of one beat of the BPM.
		Use this to set the cycle by which the flanger effect
TIME control (parameter 2)		moves.
		10 to 32000 (ms)
		The further the control is turned clockwise, the more
LEVEL/DEPTH control		the effect is stressed.
(parameter 3)		When turned all the way counterclockwise, only the
		original sound is output.

PHASER1

The phaser effect changes according to the beat fraction set with the [BEAT c, d] buttons.

Phase shift

			Time
	Cycle
BEAT c, d buttons		Use these to set the cycle for moving the phaser
		effect as of time of 1/4 – 64/1 with respect to the
(parameter 1)
		time of one beat of the BPM.
		This sets the cycle by which the phaser effect is
TIME control (parameter 2)		moved.
		10 to 32000 (ms)
		The further the control is turned clockwise, the more
LEVEL/DEPTH control		the effect is stressed.
(parameter 3)		When turned all the way counterclockwise, only the
		original sound is output.

ROBOT1

The original sound is changed to a sound like one produced by a robot.

BEAT c, d buttons	Use these to set the degree of the effect sound, from
(parameter 1)	-100 – 100 %.
TIME control (parameter 2)	Use this to set the degree of the effect sound.
	-100–100 (%)
LEVEL/DEPTH control	Sets the balance between the original sound and the
(parameter 3)	effect sound.

English

En 19