SLIP ROLL1 2

The sound being input at the point when the [ON/OFF] is pressed is recorded, and the recorded sound is output repeatedly according to the beat fraction set with the [BEAT c, d] buttons.

When the effect time changes, the input sound is recorded again.

Original

Effect turned on

Changed from 1/2

 

 

 

to 1/1

 

 

 

 

Roll

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1/2 repeat

 

1/1 repeat

 

 

 

BEAT c, d buttons

 

Use these to set an effect time of 1/16 – 16/1 with

(parameter 1)

 

respect to the time of one beat of the BPM.

TIME control (parameter 2)

Use this to set the effect time.

10 to 4000

(ms)

 

 

 

 

LEVEL/DEPTH control

 

Use this to set the balance between the original

(parameter 3)

 

sound and ROLL.

ROLL1 2

The sound being input at the point when the [ON/OFF] is pressed is recorded, and the recorded sound is output repeatedly according to the beat fraction set with the [BEAT c, d] buttons.

Original

Effect turned on

1/1 roll

 

Repeated

 

 

BEAT c, d buttons

Use these to set an effect time of 1/16 – 16/1 with

(parameter 1)

respect to the time of one beat of the BPM.

TIME control (parameter 2)

Use this to set the effect time.

10 to 4000 (ms)

 

LEVEL/DEPTH control

Use this to set the balance between the original

(parameter 3)

sound and ROLL.

REV ROLL1 2

The sound being input at the point when the [ON/OFF] button is pressed is recorded, and the recorded sound is reversed then output repeatedly according to the beat fraction set with the [BEAT c, d] buttons.

Original

Effect turned on

1/1 reverse roll

 

Reversed and repeated

 

 

BEAT c, d buttons

Use these to set an effect time of 1/16 – 16/1 with

(parameter 1)

respect to the time of one beat of the BPM.

TIME control (parameter 2)

Use this to set the effect time.

10 to 4000 (ms)

 

LEVEL/DEPTH control

Use this to set the balance between the original

(parameter 3)

sound and ROLL.

SND/RTN1

Connect an external effector, etc., here.

SEND

RETURN

Effector

A

B

DJM-850

BEAT c, d buttons

—

(parameter 1)

 

TIME control (parameter 2) —

LEVEL/DEPTH control

This adjusts the sound level input to the [RETURN]

(parameter 3)

terminal.

1If the sound of the channel you want to monitor is not output from the [MASTER] channel when [CF.A], [CF.B] or [MASTER] is selected with the [1, 2, 3, 4, MIC, CF.A, CF.B, MASTER] selector switch, the effect sound cannot be monitored even by pressing the [CUE] button for [BEAT EFFECTS].

2If the effect is off, the effect sound cannot be monitored even by pressing the [CUE] button for [BEAT EFFECTS].

20En