3.Insert the
÷Slide the drive along the left and right guides of the Changer and insert into the half of it.
÷When installing more than one new add- on drive at a single time, install each drive from the bottommost empty drive bay on upward. (Installing drives from the upper drive bays on downward will make it impossible to insert the necessary connectors.)
4.Complete installation of the
÷Reconnect the two wiring connectors on the left, and the one on the right.
Note: Harness (wire) color |
| |
Drive No. 4 | (top) ...................................... | black |
Drive No. 3 | (third from the bottom) ............ | blue |
Drive No. 2 | (second from the bottom) .... | yellow |
Drive No. 1 | (bottom) .................................. | red |
÷Be sure the drive has been fully inserted into its slot, then secure it in place with the two screws at left and right.
÷Fix the right and left cables in place using the cord holders, and then fix neatly into place. Unused power cables to the right must be returned to their original position.
*When installing two or more drives, repeat steps 3 and 4 for each drive to be installed.
Warning
Adjust the cables carefully into position so that they do not obstruct the rear panel.
Cord holder
Cord holder
8
<DRC1128> En