5. Attach the rear panel of the Changer.

INSTALLING THE CD-R DRIVE

English

6.Affix CD-R drive function switch label

÷As the printed instruction on the rear panel is for a ROM drive, affix the label to indicate the correct CD-R drive functions. (Affix the label so that it covers the original lettering.)

7.Set the SCSI ID.

÷For futher details, see A Hardware Tour (p. 6) and the changer operating manual.

Note:

CD–R DRIVE

Function switch label

O

 

1

2

N

 

1

2

 

 

OFF

OFF

 

 

- -

 

 

ON

ON

 

 

TERM

PARITY

When setting the SCSI IDs, be careful not to leave the pointer arrow of the SCSI ID switch between two figures; be sure to set the switch so that the arrow points a single figure.

8.Set the function switches (SCSI terminator & parity switches)

÷Set the terminator switch of the last drive in the daisy-chain connection to ON. For futher details, see A Hardware Tour (p. 6) and the changer operating manual.

CD–R DRIVE

�

OFF

ON

Parity

SCSI Terminator

CD–R DRIVE

9

<DRC1128> En