Pioneer DV-668AV Connecting up, Audio i.LINK connectors DV-868AVi only, Video OUT 1&2

Connecting up 02

5 AC IN

Connect the supplied power cord here, then plug into a power outlet. Refer to the illustration below when doing so to make sure the neutral and live blades are lined up properly.

AC IN	Power cord
	N	L
LIVE NEUTRAL	N : Neutral
	L : Live

6 (AUDIO) – i.LINK connectors (DV-868AVi only)

4-pin, S400 i.LINK connectors for connection to i.LINK-equipped receivers and other components. Each i.LINK connector acts simultaneously as both input and output (page 19).

7HDMI OUT

HDMI output providing a high quality interface for digital audio and video (page 21).

8 CONTROL IN / OUT

For passing remote control signals to other Pioneer components (page 23).

9 VIDEO OUT (1&2)

Standard video output(s) that you can connect to your TV or AV receiver using the supplied audio/video cable (page 14).

10 S-VIDEO OUT (1&2)

S-Video output(s) that you can use instead of the VIDEO OUT jacks (page 15).

11 COMPONENT VIDEO OUT

High quality video output for connection to a TV, monitor or AV receiver that has component video inputs.

Connect using a commercially available three-way component video cable.

Be careful to match the colors of the jacks and cables for correct connection (page 16).

•You may find it useful to have the manuals supplied with your other components handy when connecting this player.

•If you come across any unfamiliar terms in this section of the manual, take a look at Glossary on page 86.

English

13

En