Pioneer DV-868AVi, DV-668AV operating instructions Connecting up Easy connections, To power outlet

02Connecting up

Easy connections

A/V IN

TV

AUDIO		AUDIO
OUT		OUT	DIGITAL AUDIO
(2ch)		(5.1ch)		OUT
L	FRONT	SURROUND		COAXIAL
		L	CENTER

R	R	SUB
		WOOFER OPTICAL

S400

HDMI OUT

(AUDIO)

								AC IN
	AV CONNECTOR 1 (RGB)-TV/AV Receiver
IN	OUT	1	2	1		2	Y	PB
CONTROL			VIDEO		S-VIDEO		COMPONENT VID
			OUT		OUT

To power outlet

The setup described here is a basic setup that allows you to play discs using just the cables supplied with the player. In this setup, stereo audio is played through your TV.

•This player is equipped with copy protection technology. Do not connect this player to your TV via a VCR using AV cables, as the picture from this player will not appear properly on your TV. (This player may also not be compatible with some combination TV/VCRs for the same reason; refer to the manufacturer for more information.)

1Connect the VIDEO OUT and AUDIO OUT (2ch) jacks to a set of A/V inputs on your TV.

Use the supplied red/white stereo audio and yellow video cable. Make sure you match up the left and right audio outputs with their corresponding inputs for correct stereo sound.

See Using other types of video output below if you want to use a different type of connection.

•If you need another pair of stereo outputs (and don’t need to use the multichannel analog outputs), you can use the AUDIO OUT (5.1ch) FRONT L / R jacks (page 16).

2Connect the supplied AC power cord to the AC IN inlet, then plug into a power outlet.

•Do not unplug the player from the power outlet while it is switched on.

•Do not plug this player into a switched power supply found on some amplifiers and AV receivers.

14

En