Pioneer DV-668AV, DV-868AVi operating instructions Channel Level

Initial Settings menu 08

1Use the Joystick to move the cursor up/down to select a speaker.

•The L and R speakers are paired; you can’t set them differently.

Initial Settings
Digital Audio Out
Video Output	L	3m
Language	C	3m
Display	R	3m
Options	RS	3m
Speakers	LS	3m
	SW	3m
i.LINK Setup

2	Move the cursor right to change the
speaker distance for the highlighted
speaker.
3	Use the Joystick (up/down) to change
the distance.
	• When you change the distance settings of
	the front left (L) or front right (R) speakers,

You only need to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs.

These settings do not affect any digital audio output.

Initial Settings
Digital Audio Out	Audio Output Mode
		Fix
Video Output	Speaker Installation	Variable
Language	Speaker Distance
Display	Channel Level
Options
Speakers
i.LINK Setup

When set to Fix, the level of each of the 5.1 channel analog outputs is fixed. Choose Variable if you want to adjust the relative levels to balance the surround sound better for your listening room.

English

all the other speaker distances change

relative to it.

• Front left/right (L/R) speaker distances

can be set from 30 cm to 9 m in 10 cm

increments.

• The center speaker (C) and subwoofer

(SW) can be set from –2 m to +2 m

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

relative to the front left/right speakers.

• Surround left/right (LS/RS) speakers can

be set from –6 m to +2 m relative to the

front left/right speakers.

4 Move the cursor left to go back to the

speaker list if you want to modify another

speaker, or press ENTER to exit the

Speaker Distance screen.

• Speaker Distance settings do not affect

SACD playback.

Channel Level

• Default setting: Fix

You can set the individual channel levels between –6dB and +6dB in 0.5 dB increments using the test tone output as a guide to set the correct levels. Adjust the levels until the output level from all channels sounds the same from your usual listening position. Note that Audio Output Mode (page 73) must be set to 5.1 Channel in order to use the test tone.

75

En