Pioneer DV-668AV, DV-868AVi operating instructions Connections Setup, Auto Select Play

Initial Settings menu 08

Change this setting to Off if the i.LINK interface is still connected but you need to use one of the other outputs. Changing this setting to Off does not affect i.LINK thru data (i.e., if this player is between two other i.LINK components, it will still pass data between them).

Set back to On (i.LINK-ready) to be able to use the i.LINK interface.

This screen shows the output settings for Dolby Digital, DTS and MPEG audio. Depending on the other component, these may be configured automatically. If this player can’t determine the appropriate settings, the defaults are Dolby Digital, DTS and PCM. If you need to change the settings, move the cursor right and make the new setting.

English

Connections Setup

You only need to make this setting if you connected this player to other equipment using the i.LINK interface.

Initial Settings
Digital Audio Out	Audio Out	VSX-49TXi
Video Output	Connections Setup	VSX-AX10i
Language	Auto Select Play	DV-47Ai
Display	DVD-Audio Out
Options
Speakers
i.LINK Setup

This screen shows the equipment connected using the i.LINK interface.

Components which are able to receive

i.LINK Audio are shown in black (an i.LINK receiver, for example); those which can’t (a DV camcorder, for example) are shown in gray. If the player can’t display the name of a component, ‘****’ is shown; if the name can’t be determined, Unknown is displayed.

Select the component that you want to set up the audio output formats for.

Initial Settings
Digital Audio Out	Connections Setup
Video Output	VSX-49TXi : Pioneer
Language
Display	DolbyDigital	PCM
Options	DTS	DTS
Speakers	MPEG	MPEG
i.LINK Setup

Auto Select Play

• Default setting: Off

You only need to make this setting if you connected this player to other equipment using the i.LINK interface.

Initial Settings
Digital Audio Out	Audio Out	Off
Video Output	Connections Setup	VSX-49TXi
Language	Auto Select Play	VSX-AX10i
Display	DVD-Audio Out
Options
Speakers
i.LINK Setup

Using this setting you can specify up to five receivers to automatically switch input function to this player when you start playback of a disc. Highlight a receiver from the list and press ENTER.

The most recently selected component is marked with a orange box ( ). The i.LINK output when playing Dolby Digital, DTS or MPEG discs will be as set for this component (see also Connections Setup above).

Select Off to reset all the settings.

77

En