Pioneer DV-668AV, DV-868AVi operating instructions Hdmi troubleshooting

Additional information 09

HDMI troubleshooting

Problem	Remedy
No HDMI audio output.	• If the front panel HDMI indicator is lit:
	– You won’t hear any sound from the HDMI output if the source
	component is only DVI/HDCP-compatible.
	– It is not possible to output SACD or copy-controlled DVD-Audio
	CPPM sources from the HDMI connection.
	• If the front panel i.LINK indicator is unlit then:
	– Make sure that you’ve selected this player as the HDMI input in the
	settings for the component you’re using. You may need to refer to the
	instruction manual of the component to do this.
	– Check that the HDMI cable is connected properly and that the cable
	isn’t damaged.
	– Check that components connected using the HDMI interface are
	switched on and HDMI compatible. (An HDMI connection can only
	be made with components compatible with both DVI and High
	Bandwidth Digital Content Protection (HDCP).)
	– Check that the PURE AUDIO indicator is not lit. If it is, press the
	PURE AUDIO button (See also Front panel on page 24).
No HDMI video output	• Make sure that you’ve selected this player as the HDMI input in the
	settings for the component you’re using. You may need to refer to the
	instruction manual of the component to do this.
	• It is not possible to output SACD or copy-controlled DVD-Audio
	CPPM sources from the HDMI connection.
	• Check that the HDMI cable is connected properly and that the cable
	isn’t damaged.
	• Check that components connected using the HDMI interface are
	switched on and HDMI compatible. (An HDMI connection can only
	be made with components compatible with both DVI and High
	Bandwidth Digital Content Protection (HDCP).)
	• Check that the PURE AUDIO indicator is not lit. If it is, press the
	PURE AUDIO button (See also Front panel on page 24).
	• Make sure the resolution on this player matches that of the
	component you have connected using HDMI. See HDMI Settings
	on page 71 to change the HDMI resolution.
No multichannel HDMI	• Make sure the Audio setting in the HDMI menu is set to Auto (see
audio.	HDMI Settings on page 71 to do this).
	• You can’t hear multi-channel DVD-Audio using the HDMI
	interface. The signal will automatically be downmixed to stereo.

English

93

En