Pioneer DV-F07 operating instructions Video Connections, S-Video Out, Component Video Out

Video Connections

This player features S-video, composite, and component video output possibilities. Check the manual supplied with your TV or monitor to determine the best possible connection for your system.

In addition to making physical connections to your TV or monitor, it is also necessary to assign the TV screen size. You can use the [Setup Navigator] in the Setup screen General to set whether you are using a wide screen or

S-VIDEO OUT

•Make S-video connections to a TV or monitor with S-video input to produce a high quality video image.

•Use a commercially available S-video cable to connect the S-VIDEO OUT jack on the player to an S-video input on the TV or monitor.

•When making S-video connections, make sure to set VIDEO SELECT on the rear panel of the player to the top position to assign S-video output.

standard size TV or monitor (page 21). Additionally, you can use the [TV Screen] setting in the Setup screen Video menu (page 43).

VIDEO OUT

•	Make composite video connections to a standard TV
	or monitor with a video input jack.
•	Use the supplied video cable to connect the VIDEO
	OUT jack on the player to the video input on the TV or
	monitor.

VIDEO SELECT

INTERFACE

CONNECTOR

•	Be sure to match the color of the plug with the color
	of the jack (yellow).
•	When making video connections, make sure to set VIDEO
	SELECT on the rear panel of the player to the top position
	to assign composite video output.

OUT

S-VIDEO

IN

TV or monitor

S-VIDEO IN

VIDEO SELECT

INTERFACE

CONNECTOR

COMPONENT VIDEO OUT

OUT

VIDEO

IN

TV or monitor

VIDEO IN

•Make component video connections to a TV, projection monitor, or projector with component inputs for an exceptional video image that best portrays the high quality digital video recorded on DVDs.

•Use a commercially available component video cable or 3 video cords to connect the COMPONENT VIDEO OUT jacks on the player to the component jacks on the monitor.

•When making component video connections, make sure to set VIDEO SELECT on the rear panel of the player to the bottom position to assign component video output.

VIDEO SELECT

INTERFACE

CONNECTOR

YPBPR

COMPONENT

VIDEO OUT

Y PBPR

COMPONENT

VIDEO IN

	TV, projection monitor,
18	or projector