Pioneer DV-F07 Setting the OSD Language On-Screen Display Language, Setting the TV screen size

Setting the OSD Language (On-Screen Display Language)

The [OSD Language] screen establishes the OSD language, or on-screen display language, which refers to the language that is used by the player in menus and on-screen messages. Additionally, the language that is established at this setting will also be set as the audio and subtitle language.

Audio1 2 Video Language General

Setup Navigator

Language English

OSD Language français

Español

Setup player's OSD language

Move ENTER Select SETUP Exit

Settings: English*

français

Español

* Factory setting

Note

In addition to setting the OSD language, the audio and subtitle language are also set at this time. If you wish to change the audio or subtitle language to a different language, make changes in the Setup screen Language menu [Audio Language] and [Subtitle Language] as needed (page 46).

Setting the TV screen size

The [TV Connection] screen establishes the size, or more appropriately, the width to height ratio of your television or monitor. The width-to-height ratio of conventional TVs is 4:3, while the width-to-height ratio of wide screen and high-definition TVs is 16:9. This width- to-height ratio is called the aspect ratio.

Audio1 2 Video Language General

Setup Navigator

TV Connection

TV Type Widescreen (16:9)

Standard (4:3)

Widescreen TV 16:9 aspect ratio

Move ENTER Select SETUP Exit

Setting digital audio connections to an AV amplifier or decoder

The [Digital Jacks] screen establishes what kind of digital connections have been made to an AV amplifier, receiver, or external decoder. Please refer to the instructions supplied with the component the player is connected to to determine what digital audio formats can be decoded. If you have made no digital connections, select “Not Connected”.

Audio1		2	Video	Language			General
	Setup Navigator					Dolby Digital
	Amp Connection					Dolby Digital/DTS
						Dolby Digital/MPEG
		Digital Jacks				Dolby D/DTS/MPEG
						PCM
						Not Connected
	Compatible with Dolby Digital
			Move		ENTER	Select		SETUP	Exit

Settings: Dolby Digital*
Select if the connected AV component is
capable of decoding the Dolby Digital
bitstream.
Dolby Digital/DTS
Select if the connected AV component is
capable of decoding Dolby Digital and DTS
bitstreams.
Dolby Digital/MPEG
Select if the connected AV component is
capable of decoding Dolby Digital and MPEG
	SETTING
Select if the connected AV component is
bitstreams.
Dolby D/DTS/MPEG
capable of decoding Dolby Digital, DTS, and	UP
MPEG bitstreams.	THE
PCM
	PLAYER
Select if the connected AV component has
digital input jacks but no internal decoder.
Not Connected
No digital audio connections have been made.

* Factory setting

Settings: Widescreen (16:9)*

Standard (4:3)

* Factory setting

Notes

• There are two screen formats that can be used to display wide-screen format DVDs: letter box and pan & scan. When “Standard (4:3)” is selected in the Setup Navigator, the letter box screen format is automatically selected. To switch the preference to the pan & scan format, make changes in the Setup screen Video menu [TV Screen] setting (page 43).

• When “Standard (4:3)” is selected in the Setup Navigator, Linear PCM digital audio playback is output is automatically downsampled to 48 kHz (when the original signal is 96 kHz). In order to hear audio at the sampling rate of 96 kHz, set the Setup screen Video menu [TV Screen] setting to either “Wide” or “4:3 (Pan & Scan)” (page 43). Additionally, make sure that your system is set up to output the 96 kHz bitstream using either the Setup Navigator or the Setup screen Audio 1 menu [96kHz PCM Out] setting (this page and page 41 respectively).

21