Pioneer DV-F07 operating instructions Selecting External Input Expert, Audio and Video

Utilizing the Audio-Video Output of Another AV Component

7 3 8

Selecting External Input Expert

When a component is connected to the video or audio input jacks on this unit as described on pages 17 and 18, it is possible to select the input from that unit. By doing this, you can combine the audio of the connected component with the video of this player or the video of the connected component with the audio of this player, or you can even select both the audio and video input from the connected component(s).

Make selections in the Setup screen General menu [External Input] setting in the “Expert” menu mode (page 40).

Audio1 2 Video Language General

Setup Menu Mode – Expert

Setup Navigator

Parental Lock – Level 8

Screen Saver – Off

Background Color - Audio

External Input	Video
Move	Audio and Video
		SETUP	Exit

The input jacks on this player can be used for external audio and/or video input from a separate component. Additionally, when these kind of connections are made, it is possible to mix and match the audio and video inputs as you like.

Make audio and/or video connections to the input jacks on this unit as described in the previous section ‘Master- Slave Connections’.

•Select the audio or video input from the component(s) connected to the input jacks on this unit in the Setup screen General menu [External Input] setting in the “Expert” menu mode (pages 40 and this page).

•When Master-Slave connections are made to a second Pioneer DV-F07 player, it is not possible to make connections to a separate component even if some jacks are not being used by the Slave player.

Notes

•It is not possible to select two audio or two video sources at the same time.

•If a video signal is being input from an externally connected component and SETUP is pressed on the remote, the video signal of the player will appear while the Setup screen is open. This is not a malfunction.

•When external input connections are made, do not make any connections to the MASTER-SLAVE CONTROL jacks.

Settings: Off*

Audio

Selects the audio output from the connected component.

Video

Selects the video output from the connected component.

Audio and Video

Selects both the audio video output from the connected component.

*Factory setting

Notes

•It is not possible to combine two video or two audio sources.

•When “Audio and Video” is selected, there is no output from this unit.

•When Master-Slave connection is made, this setting cannot be selected.

•The output of the connected component(s) is not input when the power of the player is turned off.

•If a video signal is being input from an externally connected component and SETUP is pressed on the remote, the video signal of this unit will appear while the Setup screen is open. This is not a malfunction.

68