Pioneer DV-F07 Stopping Playback and Switching Power Off, Resuming playback from where

Stopping Playback and

Switching Power Off

– DVD/Video CD/CD

2

1	7	3	8
	4	¢￿	1 Á￿
		e	E

4 1 Á￿¢￿

ë￿

7 3 8

21

1 Press STOP 7 (7 on the front panel).

Playback stops.

2 Press ( STANDBY/ON on the front panel).

The player is put in standby.

Resuming playback from where

you stopped –– DVD/Video CD

With this player, it is possible to resume play of a DVD even when play has been stopped.

Press STOP 7 once to enable play to resume from a point shortly before the DVD was stopped when PLAY 3 is pressed again.

•To begin playback of the disc that most recently been played from the beginning, press STOP 7 twice to turn off resume playback, and then start playback again.

•When STOP 7 is pressed, “RESUME” appears in the display window for as long as resume playback is possible. If the function is canceled, “RESUME” disappears.

•Resume playback is canceled in the following conditions:

*OPEN/CLOSE 0 (OPEN/CLOSE on the front panel) is pressed to open the hood.

*MULTI DIAL on the remote control (when the dial mode indicator is lit green) or the selection dial on the front panel is turned.

*Another disc is selected.

Note

If you want to continue viewing a DVD at a later time or date, it is recommended to use the Last Memory function described on page 61.

About the Last Disc Memory function

Even after you have turned the player’s power off, the player maintains in memory what disc was playing, as well as the play mode. When power is turned on again, pressing PLAY 3 (3 on the front panel) starts playback from the last disc that was played in the previously selected play mode.

If the playback is stopped and the player is turned off during program play, random play, Best play, Previous Scan, or Hi-Lite scan, these functions will not be resumed when the player is turned on again and PLAY 3 (3 on the front panel) is pressed.

GETTING STARTED USING YOUR DVD PLAYER

29