CHARACTER INPUT/PICTURE DRAWING
Indicator on the top right
GROUP 001
001 
AUTO DISP 
SAVE DEL EXIT
TO CHANGE THE DISPLAY MODE
1.Move the cursor to the line you want to change and click the left button of the mouse.
2. Move the cursor to 
and click the left button of the mouse.
Indicator display on the right edge of screen
A: Displayed at the same time as the disc playback, from the set start point through the set end point.
A S : The video becomes a still image at the set start point.
–A S : The video becomes a still image immediately before the set start point.
No display: The set characters or pictures are not displayed.
Pressing the 
button in this section starts drawing.
S : The video becomes the still image at the set start point but objects are not displayed.
Press the 
button on the remote control unit to start picture drawing.
*: The * mark is displayed on the top right of the screen during playback.
Pressing the 
button in this section starts drawing.
*S : The video becomes a still image, in which only the * mark is displayed, at the set start point.
Press the 
button on the remote control unit to start picture drawing.
Meaning of displayed symbols
“S” stands for “Still image” and plays a still image at the IN point. “A” stands for “Auto display”, which displays drawing in the screen
set with AUTO DISP.
“*” displays only the * marking.
DVD VIDEO BLACKBOARD
PENCIL TOOL/FREEHAND DRAWING
Click the right button of the mouse in the video blackboard input screen to turn the pointer into the pencil tool. Freehand drawing is possible by holding the mouse’s left button.
Clicking the right button again displays the Blackboard screen.
CAUTION:
Ö Pictures can be drawn using the pencil tool but they cannot be saved later.
ÖTo change the color or line width, select COLR or the 
tool on the Blackboard screen. (See “Drawing Tools” on page 19.)
Freehand drawing is possible by holding the mouse’s left button.
Character input/picture drawing
21
<VRB1208>
