USING A BARCODE/COMAND STACK
Switch the command group.
BC/COMMAND STACK GROUP 001: 001
Recall screen
Switch the command step.
BC/COMMAND STACK GROUP 001: 001
Recall screen
RECALLING/EXECUTING BARCODE
COMMANDS IN MEMORY
To execute a barcode command group:
Place the disc containing commands on the disc tray.
1. Press the 
button.
2. Press the 
button.
3. Press the 
button.
4. Input the number of the command group to be recalled/ executed using the numeric buttons.
5. Press the 
button twice.
ÖThis recalls and executes the selected group.
TO EXECUTE STEPS IN A COMMAND GROUP
1. Press the 
button.
2. Press the 
button.
3. Press the 
button.
4. Input the number of the command group to be recalled/ executed using the numeric buttons.
5. Press the 
button.
ÖTo 
button.
6. Input the number of the step to begin execution using the numeric buttons.
7. Press the 
button.
ÖThis recalls and executes the selected and subsequent steps in the selected group.
NOTES:
ÖPressing the 
button while the FUNCTION indicator is lit repeats the execution of the set command.
ÖIf you press the 
button in place of the 
button in step 6 above, command steps will be executed step by step. After every
step has been executed, press the 
button to advance to the
next step. Pressing the 
button allows you to return to the previous step.
42Using a Barcode/Comand stack
<VRB1208>
