29
<VRB1208>
BARCODE/COMAND STACK
SETTING THE SUBTITLE, AUDIO AND ANGLESUBTITLE
÷“00” turns the screen color to the color specified in “Background
color” in the GUI menu and makes the played image invisible.
÷“01” to “32” displays the corresponding subtitle.
÷“33” plays with Subtitle OFF.
÷“34” is used to make the played image made invisible with “00”
visible again.
÷“99” retains the previous condition. This is used to change other
setting than SUBTITLE while maintaining the SUBTITLE setting
the same.
÷“35” to “98” are invalid.
AUDIO
÷“0” plays image with Audio OFF.
÷“1” to “8” selects and plays the corresponding audio.
÷“9” retains the previous condition.
ANGLE
÷“1” to “8” selects and plays the corresponding angle.
÷“9” retains the previous condition.
÷“0” selects and plays Angle 9.
CAUTION
÷
When “retain the previous condition” is selected, “*” is displayed
in the input screen.
÷
The barcode/command stack cannot be executed if a value that
does not exist in the disc is input.
TO USE ONLY THE CHAPTER SEARCH ORFRAME SEARCHIn item “MARK CHAPTER” or “MARK FRAME”, simply press the
button without setting anything.
A still image is displayed after search., still image is displayed after
search.
TO CHANGE A VALUE DURING INPUTPress the numeric button of the correct number (including 0).
To return to a previous setting point, press the button.
TO CANCEL INPUT IN THE MIDDLEPress the button to return to the cursor mode, move the ‰
(pointer) to “EXIT” by pressing the button and press the
button.
BARCODE/COMMAND STACK SETTING