5
<VRB1208>
ADVANCED FEATURE MENU
CONNECTION OF MOUSE AND KEYBOARD
1.Turn this unit’s POWER off to set it to
the standby mode.
2.Connect the PS/2 *mouse or PS/2
*keyboard to this unit’s MOUSE/KEY-
BOARD connector.
3.Turn this unit’s POWER ON.
Connection is now complete.
A commercially available PS/2 mouse or PS/2 keyboard can be connected to this unit’s mouse/keyboard connector as follows.
If you want to use both the mouse and keyboard, connect them using a commercially available “Y” cable.
Note:
÷
The power rating of this MOUSE/KEYBOARD connector is no more than 100mA. Do not use a mouse or keyboard with a
current drain exceeding the rating of 100mA.
÷
Certain commercially available PS/2 mouse models, PS/2 keyboard models and “Y” cables may not be compatible with
this unit. For details, please consult PIONEER technical support.
* PS/2 is a registered trademark of IBM corporation.
Connection of mouse and keyboard