Pioneer KEH-P4020 operation manual Multi-CD Player

Multi-CD Player

Playing a CD

1 2 3

You can use this unit to control a multi-CD player, which is sold separately.

1TRACK NUMBER indicator

Shows the track currently playing.

2PLAY TIME indicator

Shows the elapsed playing time of the cur- rent track.

3DISC NUMBER indicator

Shows the disc currently playing.

1Press SOURCE to select the multi-CD player.

2Use VOLUME to adjust the sound level. When you press VOLUME up/+, the volume is raised and when pressed down/–, the volume is lowered.

3Select a disc you want to listen to with the

1to 6 buttons.

For discs located at 1 to 6, press the correspond- ing number button.

If you want to select a disc located at 7 to 12, press and hold the corresponding numbers such as 1 for disc 7, until the disc number appears in the display.

• You can also sequentially select a disc by pressing 5/∞.

4To perform fast forward or reverse, press and hold 2 or 3.

5To skip back or forward to another track, press 2 or 3.

Pressing 3 skips to the start of the next track. Pressing 2 once skips to the start of the current track. Pressing again will skip to the previous track.

Notes

•When the multi-CD player performs the preparatory operations, READY is displayed.

•If the multi-CD player does not operate prop- erly, an error message such as ERROR-14may be displayed. Refer to the multi-CD player owner’s manual.

•If there are no discs in the multi-CD player magazine, NO DISC is displayed.

13En