Initial Settings

Adjusting initial settings

Setting the time

Initial settings lets you perform initial set up of different settings for this unit.

1Press SOURCE and hold until the unit turns off.

2Press AUDIO and hold until TIME appears in the display.

Press AUDIO repeatedly to switch between the following settings:

TIMEAUX

Use the following instructions to operate each particular setting.

To cancel initial settings, press BAND.

You can also cancel initial settings by holding down AUDIO until the unit turns off.

19En

This is used to set the time on the unit’s clock display.

1 Press AUDIO to select the time.

Press AUDIO until the time appears in the dis- play.

2Select the portion of the time display you wish to set with 2/3.

Pressing 2/3 will select a portion of the clock display:

HOURMINUTE

As you select portions of the clock display the portion selected will blink.

3Select the correct time with 5/. Pressing 5 will increase the selected hour or minute. Pressing will decrease the selected hour or minute.

Page 20
Image 20
Pioneer KEH-P4020 Initial Settings, Adjusting initial settings, Setting the time, Press Audio to select the time