Pioneer KEH-P4020 Audio Adjustments, Introduction of audio adjustments, Audio display

Multi-CD Player Audio Adjustments

1 Select the repeat range.

Refer to Repeating play on page 14.

2Press and hold PAUSE/SCAN for about two seconds to turn scan play on.

DSCN (scanning tracks) or SCAN (scanning discs) appears in the display. The first 10 sec- onds of each track of the present disc (or the first track of each disc) is played.

3When you find the desired track (or disc) press and hold PAUSE/SCAN for about two sec- onds to turn scan play off.

The track (or disc) will continue to play.

Note

•After track or disc scanning is finished, nor- mal playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the CD.

1Press PAUSE/SCAN to turn pause on. PAUSE appears in the display. Play of the cur- rent track pauses.

2Press PAUSE/SCAN to turn pause off. Play will resume at the same point that you turned pause on.

Introduction of audio adjustments

12

1AUDIO display

Shows the audio adjustments status.

2LOUD indicator

Appears in the display when loudness is turned on.

Press AUDIO to display the audio function names.

Press AUDIO repeatedly to switch between the following audio functions:

FAD (balance adjustment)—EQ-L(equalizer)— LOUD (loudness)—FIE(front image enhancer)—SLA(source level adjustment)

•When selecting the FM tuner as the source, you cannot switch to SLA.

•To return to the display of each source, press

BAND.

Note

•If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display.

15En