Pioneer KEH-P4020 Tuner, Listening to the radio, Band indicator, Stereo  indicator

Tuner

Listening to the radio

12 3 4

1 BAND indicator

Shows which band the radio is tuned to, AM or FM.

2FREQUENCY indicator

Shows to which frequency the tuner is tuned.

3PRESET NUMBER indicator

Shows what preset has been selected.

4STEREO () indicator

Shows that the frequency selected is being broadcast in stereo.

7En

1Press SOURCE to select the tuner.

2Use VOLUME to adjust the sound level. When you press VOLUME up/+, the volume is raised and when pressed down/–, the volume is lowered.

3Press BAND to select a band.

Press BAND until the desired band is displayed, F1, F2, F3 for FM or AM.

4To perform manual tuning, press 2 or 3 with quick presses.

The frequencies move up or down step by step.

5To perform seek tuning, press and hold 2 or 3 for about one second and release.

The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

• You can cancel seek tuning by pressing either 2 or 3 with a quick press.

• If you press and hold 2 or 3 you can skip broadcasting stations. Seek tuning starts as soon as you release the buttons.

Note

•When the frequency selected is being broad- cast in stereo the STEREO () indicator will light.