13Useful Features
97
En
Learning function of the remotecontrol unit
You can operate the connected AV products (AV Re-
ceiver, Cable Box, SAT tuner, VCR, DVD, DVD recorder,
LD) using the learning function of your remote control
unit. This remote control unit has a function that can
memorize each remote control code.
2 to 5 cm (0.8 to 2.0 inches)
Remote control Remote control of
(Supplied accessory) AV product

Using the learning function

1Slide the Mode switch to match the device whose
remote control signal you want to be learned.
2Press EDIT/LEARN and 2 at the same time.
•The LED flashes.
3Press a button to be learned.
•The LED lights up.
•For the functions that can be learned, see pages
100 to 105.
•When learning is finished, the LED starts
flashing again.
4Press EDIT/LEARN again to exit the Learn mode.
•To exit the Learn mode halfway, press EDIT/LEARN
again.
•If the Mode switch selection is changed when in the
Learn mode, the Learn mode is cancelled.
•If no operation is performed for more than one
minute, the Learn mode is cancelled.
•It takes about 2 seconds to finish code transmission.
Do not interrupt it halfway. Wait until the LED flashes
again.
•You can reset all learned codes to the factory de-
faults. When not in the Learn mode, press and hold
TVa, and then press D and k at the same time.
PDP-ELITE-Eng (97-105) 9/9/03, 11:4797