07 Preparation
22
En
Using the remote control unit
Use the remote control unit by pointing it towards the
remote sensor window. Objects between the remote
control unit and sensor window may prevent proper
operation.

Cautions regarding the remote control

unit

•Do not expose the remote control unit to shock. In
addition, do not expose the remote control unit to
liquids, and do not place in an area with high humid-
ity.
•Do not install or place the remote control unit under
direct sunlight. The heat may cause deformation of
the unit.
•The remote control unit may not work properly if the
remote sensor window of the Plasma Display is under
direct sunlight or strong lighting. In such case,
change the angle of the lighting or Plasma Display
set, or operate the remote control unit closer to the
remote sensor window.

Inserting batteries

If the remote control unit fails to operate Plasma
Display System functions, replace the batteries in the
remote control unit.
1Open the battery cover.
2Insert the two AA size batteries supplied with the
product.
•Place batteries with their terminals corresponding
to the (+) and (–) indicators in the battery compart-
ment.
3Close the battery cover.
PDP-ELITE-Eng (17-27) 9/9/03, 11:4422