12Useful Adjustment Settings
95
En
Programming a password(AV mode only)You can program a password to prevent other persons
from changing especially Parental Control settings.
Setting and changing the password
Use the following procedure to newly set or change the
password:
1Press HOME MENU.
2Press / to select “Setup”, and then press
ENTER.
3Press / to select “Password”, and then press
ENTER.
•If you have set a password, the password entry
screen appears. Enter your 4-digit password
using buttons 0 – 9.
•The factory default is “1234”.
4Press / to select “Change Password”, and then
press ENTER.
5Enter a 4-digit password to be newly set, using
buttons 0 – 9.
Change Password
Please Input New Password.
Reconfirm New Password.
6Enter the same password that you have entered in
step 4, using buttons 0 – 9.
Change Password
Please Input New Password.
Reconfirm New Password.
****
7Press HOME MENU to exit the menu.
•Take a note of the newly set password and keep it
handy.
PDP-ELITE-Eng (81-96) 9/9/03, 11:4795