12Useful Adjustment Settings
81
En
Adjusting image positions(AV mode only)
Adjust the horizontal and vertical positions of images
on the Plasma Display.
1Press HOME MENU.
2Press / to select “Option”, and then press
ENTER.
3Press / to select “Position”, and then press
ENTER.
4Press / to select “H/V Position Adjust”, and
then press ENTER.
Position
H/V Position Adjust
Reset
5Press / to adjust the vertical position or press
/ to adjust the horizontal position.
H/V Position Adjust
0 0
6Press HOME MENU to exit the menu.
•To restore the factory defaults for all the items, press
/ to select “Reset” in step 4, and then press
ENTER. A confirmation screen appears. Press /
to select “Yes”, and then press ENTER.
•Adjustments are stored separately according to input
source.
Adjusting image positions and clockautomatically (PC mode only)
Use Auto Setup to automatically adjust positions and
clock of images coming from a personal computer.
1Press HOME MENU.
2Press / to select “Option”, and then press
ENTER.
3Press / to select “Auto Setup”, and then press
ENTER.
Option
Auto Setup
Manual Setup
•Auto Setup starts.
4Press HOME MENU to exit the menu.
•When Auto Setup is finished, “Auto Setup com-
pleted.” appears.
•Even when “Auto Setup completed.” appears, Auto
Setup may have failed, depending on conditions.
•Auto Setup may fail with a PC image composed of
similar patterns or monochrome. If not successful,
change the PC image and try again.
•Be sure to connect the computer to the Media
Receiver and switch it on before starting Auto Setup.
PDP-ELITE-Eng (81-96) 9/9/03, 11:4781