PICTURE menu
With the PICTURE menu, items shown in the table below can be performed.
Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.
Item |
| Description | |
BRIGHT | Using the buttons ▲/▼ adjusts the brightness. | ||
| Light ↔ Dark |
|
|
CONTRAST | Using the buttons ▲/▼ adjusts the contrast. | ||
| Strong ↔ Weak |
| |
GAMMA | Using the buttons ▲/▼ switches the GAMMA | ||
| mode. |
|
|
| #1 DEFAULT | #1 CUSTOM | #2 DEFAULT |
| #3 CUSTOM | #3 DEFAULT | #2 CUSTOM |
To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM
Selecting a mode of CUSTOM and then pressing the button ► or the ENTER button displays a dialog to aid you in adjusting the mode.
This function is useful when you want to change the brightness of particular tones. Choose an item using the buttons ◄/►, and adjust the level using the buttons ▲/▼.
Using a test pattern
You can display a test pattern for checking the effect of your adjustment by pressing the ENTER button. Each time you press the ENTER button, the pattern changes as below.
No pattern Gray scale of 9 steps
Ramp Gray scale of 15 steps
Eight of equalizing bars corresponds to eight of tone level of test pattern except the darkest in the left end. If you want to adjust the 2nd tone from left end on the test pattern, use the equalizing adjustment bar “1”. The darkest tone at the left end of the test pattern cannot be controlled with any of equalizing adjustment bar.
ViewSonic PJ452 | 27 |
