SETUP menu
With the SETUP menu, items shown in the table below can be performed.
Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.
Item |
| Description |
ZOOM | Using the buttons ▲/▼ adjusts the zoom (magnifying power). | |
| Large ↔ Small | |
|
| |
KEYSTONE | Using the buttons ▲/▼ corrects the keystone distortion. | |
| Upper in the data ↔ Lower in the data | |
| • The adjustable range of this function will vary with the type of | |
| input signal. At some signals, this function may not work well. | |
| • When the V:INVERT or the H&V:INVERT is selected under | |
| the item MIRROR, if the projector screen is inclined or if the | |
| projector is angled downward, this function may not work | |
| correctly. |
|
| • When the zoom adjustment is set to the TELE side, this | |
| correction may be excessive. This function should be used with | |
| zoom set to WIDE whenever possible. | |
WHISPER | Using the buttons ▲/▼ turns off/on the whisper mode. | |
| NORMAL | WHISPER |
| • When the WHISPER is selected, acoustic noise and screen | |
| brightness are reduced. | |
MIRROR | Using the buttons ▲/▼ switches the mode for mirror status. | |
| NORMAL | H:INVERT V:INVERT H&V:INVERT |
| ════=══=══=══=══=══=══=════ | |
|
| |
VOLUME | Using the buttons ▲/▼ adjusts the volume. | |
| High ↔ Low |
|
|
|
|
ViewSonic PJ452 | 34 |
