ViewSonic PJ452 manual Input menu, Space Auto RGB, Video, Format Auto Ntsc PAL Secam

INPUT menu

With the INPUT menu, items shown in the table below can be performed.

Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

Item			Description
COLOR	Using the buttons ▲/▼ switches the mode for color space.
SPACE	AUTO	RGB	SMPTE240 REC709 REC601
	════=══=══=══=══=══=══=════
	• This item can be chosen only at a RGB signal or a component
	video signal.
	• The AUTO mode automatically selects the optimum mode.
	• The AUTO operation may not work well at some signals. In
	such a case, it might be good to select the SMPTE240 or the
	REC709.
VIDEO	Using the buttons ▲/▼ switches the mode for video format.
FORMAT	AUTO	NTSC	PAL SECAM
	N-PAL	M-PAL	NTSC4.43
	• This item performs only at a video signal from the VIDEO
	port or the S-VIDEO port. For a component video signal, the
	signal type is identified automatically, independently of this
	function.
	• The AUTO mode automatically selects the optimum mode.
	• The AUTO operation may not work well at some signals. If the
	picture becomes unstable (ex. an irregular picture, a color lack),
	please select the mode depending on the input signal.

ViewSonic PJ452 32