ViewSonic PJ452 manual Easy Menu

EASY MENU

With the EASY MENU, items shown in the table below can be performed.

Choose an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table.

Item	Description
ASPECT	Using the buttons ◄/► switches the mode for aspect ratio.
	See the item ASPECT of section IMAGE menu. (	19, 30)
ZOOM	Using the buttons ◄/► adjusts the zoom.
	See the item ASPECT of section SETUP menu. (	19, 34)
KEYSTONE	Using the buttons ◄/► corrects the keystone distortion.
	See the item KEYSTONE of section SETUP menu. (		20,34)
MODE	Using the buttons ◄/► switches the mode of picture type. The
	modes of picture type are combinations of a mode of GAMMA
	( 27) and a mode of COLOR TEMP ( 28). Choose a suitable
	mode according to the projected source.
	NORMAL CINEMA DYNAMIC
	═══════════════
	NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA= #1
	DEFAULT)
	CINEMA: (COLOR TEMP = LOW) + (GAMMA= #2 DEFAULT)
	DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA= #3
	DEFAULT)
	• When the combination of GAMMA and COLOR TEMP differs
	from pre-assigned modes above, the display on the menu for the
	MODE is “CUSTOM”.
BRIGHT	Using the buttons ◄/► adjusts the brightness.
	See the item BRIGHT of section PICTURE menu. (		27)
CONTRAST	Using the buttons ◄/► adjusts the contrast.
	See the item CONTRAST of section PICTURE menu. (			27)
COLOR	Using the buttons ◄/► adjusts the strength of whole color.
	See the item COLOR of section PICTURE menu. (	28)
	• This item can be chosen only at a video signal.
TINT	Using the buttons ◄/► adjusts the tint.
	See the item TINT of section PICTURE menu. (	28)
	• This item can be chosen only at a video signal.
SHARPNESS	Using the buttons ◄/► adjusts the sharpness.
	See the item SHARPNESS of section PICTURE menu. (			28).

ViewSonic PJ452 25