ViewSonic PJ452 manual IMAGE menu

IMAGE menu

With the IMAGE menu, items shown in the table below can be performed.

Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

Item		Description
ASPECT	Using the buttons ▲/▼ switches the mode for aspect ratio.
	At a RGB signal
	4:3	16:9 NORMAL
		═════════
	At a video signal / no signal
	4:3	16:9
		═══
	• The NORMAL mode keeps the original aspect ratio of the
	signal.
	• At a HDTV component video signal of 1125i (1080i) or 750p
	(720p), this item can’t be chosen.
	• Performing the automatic adjustment initializes the aspect
	ratio setting.
OVER SCAN	Using the buttons ▲/▼ adjusts the over-scan ratio.
	Large (It reduces picture) Small (It magnifies picture)
	• This item can be chosen only at a video signal.
	• When this adjustment is too large, certain degradation may
	appear at the frame area of the picture. In such a case, please
	adjust small.
V POSITION	Using the buttons ▲/▼ adjusts the vertical position.
	Up ↔ Down
H POSITION	Using the buttons ▲/▼ adjusts the horizontal position.
	Left ↔ Right
H PHASE	Using the buttons ▲/▼ adjusts the horizontal phase to
	eliminate flicker.
	Right ↔ Left
	• This item can be chosen only at a RGB signal or a component
	video signal (except 525i (480i) and 625i (576i)).

ViewSonic PJ452 30