ViewSonic PJ452 manual Start UP

SCREEN menu (continued)

Item	Description
START UP	Using the buttons ▲/▼ switches the mode for the start up screen.
	The start up screen is the screen displayed when no signal or an
	unsuitable signal is detected.
	MyScreen ORIGINAL TURN OFF
	════=══=══=══=══=═══
	MyScreen is the screen you can register a desired screen. ORIGINAL
	screen is the existing standard screen. When the TURN OFF is
	selected, the BLACK screen is used.
	• To avoid remaining as an afterimage, the MyScreen and the
	ORIGINAL screens will change to the BLANK screen after several
	minutes. If also the BLANK screen is the MyScreen or ORIGINAL,
	it will change to the BLACK screen.
	• For the MyScreen, please refer to the item MyScreen below. About
	the BLANK screens, please refer to the item BLANK. ( 35)
MyScreen	This item functions for capturing the MyScreen of the blank screen
	and the start up screen. Please execute displaying the input including
	the picture you want to capture.
	1. Choosing this item displays a dialog titled
	“MyScreen”. It will ask you if you start
	capturing the picture from the current screen.
	Please wait for the target picture to be
	displayed.
	2. Press the ENTER button when the picture
	is display. The picture will freeze and the
	frame for capturing appears.
	To stop performing, press the RESET or
	ESC button.
	3. Using the buttons ◄/►/▲/▼ adjust the frame position. Please
	move the frame to the position of the picture which you want to use.
	To start registration, press the ENTER
	button.
	To restore the screen and return to the previous dialog, press the
	RESET or ESC button.
	Registration takes several minutes. When the registration is
	completed, the registered screen and the message “MyScreen
	registration is finished.” are displayed for several seconds. If the
	registration failed, the message “A capturing error has occurred.
	Please try again.” is displayed.

SCREEN menu (continued)

ViewSonic PJ452 36