Pioneer PRV-LX1 manual 1.0Foreword

PRV-LX1 RS-422A Protocol

1.0Foreword

The PRV-LX1 can be controlled externally using RS-422A commands. Control is applied through the REMOTE IN and REMOTE OUT D-Sub 9 connector on the rear panel. Set the RS-422A REMOTE controls through the main menu. Press the Function button on the PRV-LX1’s front panel to access the menu. Control Settings are accessed through the Setup menu.

The REMOTE IN connector is used when controlling this unit with an external device. The REMOTE OUT connector is used for external control with this unit.

Note: This document is valid for PRV-LX1 System Version 3.01/1.04 or later/

Page 2 of 18