Pioneer S-DV5SW, S-DV585, S-DV282T, S-DV280T, S-DV180, XV-DV282 Bluetooth connection, Error Messages

13Additional information

Problem	Remedy
No picture or sound.	• If the problem still persists when connecting your HDMI component directly to your
	monitor, please consult the component or monitor manual or contact the
	manufacturer for support.
No HDMI audio output.	• See Switching the HDMI audio setting on page 41 to make sure that TV is
	selected.
KURO LINK does not	• Verify that the HDMI cable is firmly connected.
function.	• Make sure that this unit’s KURO LINK mode is set to LINK ON (page 45).
	• Check whether the connected component supports KURO LINK or not. For more
	information refer to the operating manual of your flat screen TV.
	• KURO LINK may not work properly if a SCART cable and an HDMI cable are
	connected simultaneously. Set KURO LINK mode to LINK OFF when connecting
	SCART and HDMI cables simultaneously.
Your TV automatically	• The connected TV automatically may change inputs in response to this unit
change inputs.	starting playback DVD or having the GUI screen (ex. Disc Navigator) displayed, etc. If
	you do not want your TV to change inputs in this way, set this unit KURO LINK mode
	to LINK OFF (page 45).

Bluetooth connection

ProblemRemedy

The Bluetooth wireless technology device cannot be connected or operated. Sound from the Bluetooth wireless technology device is not emitted or the sound is interrupted.

•Check that no object that emits electromagnetic waves in the 2.4 GHz band (microwave oven, wireless LAN device or Bluetooth wireless technology apparatus) is near the unit. If such an object is near the unit, set the unit far from it. Or, stop using the object emitting the electromagnetic waves.

•Check that the Bluetooth wireless technology device is not too far from the unit and that obstructions are not set between the Bluetooth wireless technology device and the unit. Set the Bluetooth wireless technology device and the unit so that the distance between them is less than about 10 m and no obstructions exist between

them.

•Check that the Bluetooth ADAPTER and the ADAPTER PORT of the unit are correctly connected.

•The Bluetooth wireless technology device may not be set to the communication mode supporting the Bluetooth wireless technology. Check the setting of the Bluetooth wireless technology device.

•Check that pairing is correct. The pairing setting was deleted from this unit or the Bluetooth wireless technology device. Reset the pairing.

•Check that the profile is correct. Use a Bluetooth wireless technology device that supports A2DP profile and AVRCP profile.

Error Messages

Message	Description
EXTRAPWR	• You cannot adjust SFC modes, tone controls (bass, treble, and bass boost),
	MP3 Expander mode, Voice Enhancer mode when using Extra Power mode.
CANNOT	• Operation is prohibited because DVD/CD or USB isn’t selected, or
	SHIFT+KARAOKE, SHIFT+ECHO, SHIFT+ or SHIFT+ has been pressed.
	• Appears when DVD/CD is not selected and SHIFT+USB REC is pressed.
TRAYLOCK	• The tray lock is on. See General in Troubleshooting on page 53.

56

En