01Speaker Setup Guide

Chapter 1

Speaker Setup Guide

Safety precautions when setting up

When assembling the speakers, lay them down flat on their side to avoid accidents or injury. Make sure to use a stable surface when assembling, setting up, and placing the speakers.

Home theater sound setup

Depending on the size and characteristics of your room, you can place your speakers in one of two ways using this system:

¥Attach the smaller non-skid pads to the base of each of the front speakers and the center speaker. The four large non-skid pads are for the receiver subwoofer (as shown).

Use the supplied adhesive to attach 4 pads to the base (flat surface) of each speaker.

Non-skid pads (small) x 12

Front speakers

Center speaker

 

Non-skid pads (large) x 4

Standard surround setup

This is a standard multichannel surround sound speaker setup for optimal 5.1 channel home theater sound. Use this setup together with Auto listening mode on page 18 or other listening mode.

Front

Front

left

right

 

Center

 

Receiver subwoofer

Surround

Surround

left

right

Listening position

¥Connect the speaker system.

Refer to Connecting up to connect the speakers properly. After connecting everything, place the speakers as shown in the diagram (above) for optimal surround sound.

After placing the speakers, run the Auto MCACC setup (page 16) to complete your surround sound setup.

Receiver subwoofer

6

En

Page 6
Image 6
Pioneer S-X360, SX-X360 manual Speaker Setup Guide Chapter, Safety precautions when setting up, Home theater sound setup