Pioneer SX-X360, S-X360 manual Other connections, Display, SR+ Setup for Pioneer plasma displays

Other connections 08

	SR+ Setup for Pioneer plasma displays
Using this unit with a Pioneer plasma
	Make the following settings if you have connected a
display	Pioneer plasma display to this unit using an SR+ cable.

English

If you have a Pioneer plasma display1, you can use an

SR+ cable2 to connect it to this unit and take advantage of various convenient features, such as controlling this unit via the plasma display’s remote sensor, automatic video input switching of the plasma display, display unit messages appearing on the plasma display screen, and automatic volume muting on the plasma display.

Media receiver
		CONTROL
		OUT
								Pioneer plasma display
						ANTENNA
			MCACC CONTROL IN
			SETUP MIC			FM			AM
						UNBAL 75Ω			LOOP ANTENNA
							AUDIO	INPUT
	CONTROL		SPEAKERS				DIGITAL
SYSTEM CONNECTOR						DVD/DVR	XBOX 360	DIGITAL	ANALOG
	OUT	SUB WOOFER	R	SURROUND L
						(COAXIAL)	(OPTICAL) (OPTICAL)
									L
									R
USE ONLY WITH
DISPLAY UNIT		CENTER	R	FRONT	L
	AC IN

Important

		TIMER REC	REC MODE
SET UP		SR+ ONETOUCHCOPY
1
	ENTER		MENU
MCACC		TEST TONE	VIDEO IN
7		9
SURROUND	ADVANCED	SOUND
	0
			JUKE BOX
	+	+
INPUT	CHANNEL	VOLUME	DISPLAY
	–	–

RDS DISP

AXD7442

1Press SR+.

2	Use the	(cursor left/right) buttons to
choose SETUP, then press ENTER.
3	Use the	(cursor left/right) buttons to

choose the setting you want to adjust.

The current setting is shown for each option as you cycle through the display. See below for a full list and description of each.

4 Use the	(cursor up/down) buttons to adjust
the setting.

5Repeat steps 3 and 4 to make other settings.

6When youÕre done, press ENTER to leave the SR+ setup menu.

•With an SR+ cable connected, the remote must now be pointed towards your plasma display rather than the display unit of the receiver subwoofer in order to control the receiver subwoofer.

¥Use a 3-ringed miniplug SR+ cable to connect the CONTROL IN jack of this unit (through a media receiver, if applicable) to the CONTROL OUT jack of

your plasma display.3

Before you can use the extra SR+ features, you need to make a few settings in the unit—see SR+ Setup for Pioneer plasma displays below.

Automatic plasma display volume muting

When Volume Control is switched on, the volume of the plasma display is automatically muted when the receiver subwoofer is switched on, or the receiver subwoofer’s input function is changed to one that you would want to hear the sound from the receiver subwoofer rather than the plasma display (DVD, for example).

•VOL.C ON – When this unit is switched on, or the input function is changed, the volume on the plasma display is muted so only sound from this unit is heard.

•VOL.C OFF – This unit does not control the volume of the plasma display

Note

1 This system is compatible with all Pioneer plasma displays from 2003 onward.

2The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Customer Support division for more information on obtaining an SR+ cable.

3 You won’t be able to use the remote sensor of this unit with the CONTROL IN jack of this unit connected to the CONTROL OUT jack of your plasma display. You can use the remote sensor of the plasma display (even in standby) as long as the power isn’t switched off.

27

En