05Listening to your system
Chapter 5
Listening to your system
Auto listening mode
The Auto listening mode is the simplest way to listen to any source as it was mastered: the output from the speakers mirrors the channels in the source material.
If you set up the system for Front surround (page 7), the Front Surround modes will give the best results (see Using Front Surround on page 19).
MCACC | /TUNE– TEST TONE | VIDEO IN | |
7 | 8 | 9 |
|
| SURROUND | SOUND |
|
| + | + |
|
INPUT | CHANNEL | VOLUME | DISPLAY |
– –
RDS DISP
AXD7442
¥Press SURROUND to select the AUTO listening mode.
If the source is Dolby Digital or DTS, the front panel 2 D or DTS indicator lights.
•You can also use the SURROUND button on the display unit to change the listening mode.
Listening in surround sound
You can listen to stereo or multichannel sources in surround sound. Surround sound is generated from stereo sources using one of the Dolby Pro Logic decoding modes.
If you set up the system for Front surround (page 7), the Front Surround modes will give the best results (see Using Front Surround on page 19).
MCACC | /TUNE– TEST TONE | VIDEO IN | |
7 | 8 | 9 |
|
| SURROUND | SOUND |
|
| + | + |
|
INPUT | CHANNEL | VOLUME | DISPLAY |
– –
RDS DISP
AXD7442
¥Press SURROUND repeatedly to select a listening mode.
•You can also use the SURROUND button on the display unit to change the listening mode.
The choices that appear in the display will vary according to the type of source that’s playing.
If the source is Dolby Digital or DTS, the front panel 2 D or DTS indicator lights.
•AUTO – Auto listening mode (see above)
•DOLBY PL (Dolby Pro Logic) – 4.1 channel surround sound for use with any
•MOVIE (Dolby Pro Logic II Movie) – 5.1 channel surround sound, especially suited to movie sources, for use with any
•MUSIC (Dolby Pro Logic II Music) – 5.1 channel surround sound, especially suited to music sources, for use with any
•STEREO – See Listening in stereo on page 19
Dolby Pro Logic II Music settings
When listening in Dolby Pro Logic II Music mode (see above), there are three settings you can adjust: Center Width, Dimension, and Panorama.
|
| TIMER REC | REC MODE |
SET UP | /TUNE+ | SR+ |
|
1 |
| 3 |
|
/ST– | ENTER | /ST+ | MENU |
SOUNDMCACC | /TUNE– TEST TONE | VIDEO IN | |
9
ADVANCED
0
1With Dolby Pro Logic II Music mode active, press
SOUND.
2 Use (cursor left/right) to select C WIDTH, DIMEN. or PANORAMA then press ENTER.
•C WIDTH (Center Width): Provides a better blend of the front speakers by spreading the center channel between the front right and left speakers, making it sound wider (higher settings) or narrower (lower settings)
•DIMEN. (Dimension): Adjusts the depth of the surround sound balance from front to back, making the sound more distant (minus settings), or more forward (positive settings)
•PANORAMA: Extends the front stereo image to include the surround speakers for a ‘wraparound’ effect.
3 Use (cursor up/down) to adjust the setting then press ENTER to confirm.
18
En
