Using the DVD Multi Playback Mode

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVD player. Before playing back a DVD, refer also to the manual supplied with the DVD player.

IMPORTANT:

When using the remote control, check to see if its
remote control mode selector is set to the correct	AUDIO/
position:	TV/VCR


To operate this receiver, set it to “AUDIO/TV/
	CATV/DBS
	CATV/DBS
VCR.”
VCR.”

Activating the DVD MULTI Playback Mode

You can adjust the DVD MULTI playback mode while playing back a DVD using the analog discrete output mode on the DVD player. Once you have made adjustments, the receiver memorizes the

4.Adjust the center tone.

1)Press BALANCE/SURROUND ADJUST repeatedly until “CENTER TONE” appears on the display.

The display changes to show the current setting.

2)Turn MULTI JOG to select the center tone level you want.

The center tone adjustment affects the mid-frequency range, which the human voice is mostly made up of.

•As you turn it, the display changes to show the following:

BALANCE/SURROUND

ADJUST

MULTI JOG

adjustments until you change them. You also need to set the DVD player to the analog discrete output mode.

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

CENTER SHARP1 CENTER SHARP2 CENTER FLAT

(Canceled)

CENTER SOFT 1 CENTER SOFT 2

To make the dialogue clearer, select “CENTER SHARP1”

(little) or “CENTER SHARP2” (much).

On the front panel:

1. Turn SOURCE SELECTOR until “DVD MULTI” appears on the display.

Note:

SOURCE SELECTOR

To make the dialogue softer, select “CENTER SOFT 1” (little) or “CENTER SOFT 2” (much).

When “CENTER FLAT” is selected, no adjustment is applied.

When you select “DVD MULTI” as the source to play, the DSP mode is canceled temporarily, and the SURROUND ON/OFF and DSP MODE buttons do not work.

2.Select the analog discrete output mode on the DVD player, and start playing a DVD.

• Refer to the manual supplied with the DVD player.

If you need to make any adjustment, go to the following steps.

3. Adjust the speaker output levels.	BALANCE/SURROUND
		ADJUST

1)Press BALANCE/SURROUND ADJUST repeatedly until one of the indications appears on the display. “CENTER LEVEL”:

To adjust the center speaker level. “REAR L LEVEL”:

To adjust the left rear speaker level. “REAR R LEVEL”:

To adjust the right rear speaker level.

2)Turn MULTI JOG to adjust the selected speaker output level (from –10 dB to +10 dB).

3)Repeat 1) and 2) to adjust the other speaker output levels.

MULTI JOG

RX-8000VBK specifications

The JVC RX-8000VBK is a robust and versatile audio receiver that delivers exceptional sound quality and a suite of features designed to enhance any home theater experience. As part of JVC's commitment to high-performance audio solutions, the RX-8000VBK stands out with a combination of innovative technologies and user-friendly functionality.

One of the standout features of the RX-8000VBK is its impressive power output. With a robust amplifier section, it delivers 100 watts per channel across 7 channels, ensuring that even the most demanding audio tracks can be played with clarity and authority. This power enables it to drive a variety of speaker configurations, making it suitable for both small and large setups.

The RX-8000VBK supports a wide range of audio formats, including PCM, Dolby Digital, DTS, and more, providing users with the flexibility to enjoy their favorite movies and music without compromise. Its advanced digital signal processing technology enhances the listening experience by ensuring sound is reproduced accurately, maintaining the integrity of the original recording.

Connectivity is another strong point of the RX-8000VBK. It features multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. This versatility makes it easy to switch between devices without having to constantly change cables. Additionally, the receiver is equipped with optical and coaxial digital audio inputs for further connectivity options.

For those who appreciate a user-friendly interface, the RX-8000VBK does not disappoint. It comes with an intuitive remote control and an on-screen display that makes setup and navigation straightforward. The inclusion of a built-in AM/FM tuner also ensures that listeners can enjoy their favorite radio stations with clarity.

The receiver incorporates advanced room calibration technology, which helps optimize audio performance based on the specific acoustics of the listening environment. This feature adjusts speaker levels, delays, and EQ settings automatically, delivering tailored sound that suits individual spaces.

In terms of design, the JVC RX-8000VBK features a sleek and modern aesthetic, with a polished finish that complements any home entertainment setup. Its compact form factor allows it to fit neatly into AV racks and cabinets.

Overall, the JVC RX-8000VBK is a powerful audio receiver that excels in delivering rich, immersive sound for a variety of entertainment experiences. With its combination of advanced technology, connectivity options, and user-friendly features, it is a worthwhile investment for anyone looking to elevate their home audio system.

JVC RX-8000VBK manual Using the DVD Multi Playback Mode, Activating the DVD Multi Playback Mode

Models: RX-8000VBK