Using the SEA Modes
The SEA (Sound Effect Amplifier) modes give you control of the way your music sounds.
IMPORTANT:
When using the remote control, check to see if its
remote control mode selector is set to the correct | AUDIO/ |
TV/VCR | |
position: |
|
To operate this receiver, set it to “AUDIO/TV/ | CATV/DBS |
VCR.” |
|
Creating Your Own SEA Mode
You can adjust and store your own SEA adjustment into memory (SEA USERMODE).
Selecting Your Favorite SEA Mode
Before you start, remember...
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
On the front panel ONLY:
On the front panel:
Press SEA MODE repeatedly until the SEA mode you want appears on the display.
SEA MODE
If you do not want to store your adjustment, but rather want to adjust the SEA temporarily, skip step 4 below.
• Each time you press the button, the SEA mode changes as follows:
SEA ROCK
SEA MUSICAL
SEA MOVIE 
SEA COUNTRY
SEA OFF 
SEA USERMODE 
SEA JAZZ 
1. Press SEA ADJUST repeatedly | SEA ADJUST | ||||||||||||
| |||||||||||||
until the frequency range (100Hz, |
| ||||||||||||
1kHz or 10kHz) you want appears |
| ||||||||||||
on the display. |
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SEA ROCK:Gives a heavy sound. Both high and low frequencies are boosted.
SEA MUSICAL: Enhances the
SEA MOVIE: Adds breadth to sounds so you feel like you are in a movie theater.
SEA COUNTRY: Enhances the
SEA JAZZ:Gives a feeling of a live atmosphere. Good for acoustic music.
SEA USERMODE: Your original SEA adjustment (see the right).
SEA OFF:No SEA mode is applied (see below).
Notes:
•The SEA modes cannot be used for recording.
•When the SEA mode is turned on, the SEA indicator lights up on the display.
•When the SEA mode is used with the DAP mode (see page 25), sounds may be distorted. If this happens, turn off the DAP mode or decrease the effect level of the DAP mode.
MULTI JOG
2.Turn MULTI JOG to adjust the SEA level of the selected frequency range.
•Turning it clockwise increases the level.
•Turning it counterclockwise decreases the level.
3.Repeat step 1 and 2 to adjust other frequency ranges if necessary.
4. Press TUNER/SEA MEMORY. | TUNER/SEA MEMORY |
|
Your adjustment is stored into the SEA
USERMODE.
To cancel the SEA mode
Press SEA MODE repeatedly until “SEA OFF” appears. The SEA indicator goes off from the display.
| To recall your own SEA adjustment |
From the remote control: | Press SEA MODE repeatedly until “SEA USERMODE” appears. |
| SOUND |
1. Press SOUND.
The 10 keys are activated for sound adjustments.
2.Press SEA MODE repeatedly until the SEA mode you want appears on the display.
To cancel the SEA mode
SEA MODE
10
RETURN
To erase a stored adjustment
Storing a new adjustment into SEA USERMODE erases the previously stored one.
Press SEA MODE repeatedly until “SEA OFF” appears in step 2 above. The SEA indicator goes off from the display.
21
