Warnings, Cautions and Others

 

 

CAUTION

 

 

 

RISK OF ELECTRIC SHOCK

 

 

 

DO NOT OPEN

 

 

 

 

 

 

 

 

 

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK.

 

DO NOT REMOVE COVER (OR BACK)

 

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

Caution –– POWER switch!

Disconnect the mains plug to shut the power off completely. The POWER switch in any position does not disconnect the mains line. The power can be remote controlled.

Caution –– SPEAKER LOAD SELECTOR switch!

Match the position of SPEAKER LOAD SELECTOR switch on the back panel to the impedance of the speaker connected, to protect from overheating.

For U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Caution: Proper Ventilation

To avoide risk of electric shock and fire and to protect from damage. Locate the apparatus as follows:

Front:

No obstructions open spacing.

Sides:

No obstructions in 10 cm from the sides.

Top:

No obstructions in 10 cm from the top.

Back:

No obstructions in 15 cm from the back

Bottom:

No obstructions, place on the level surface.

In addition, maintain the best possible air circulation as illustrated.

Wall or obstructions

Spacing 15 cm or more

Front

RX-8000VBK

Stand height 15 cm or more

Floor

G-1

Page 2
Image 2
JVC RX-8000VBK manual For U.S.A

RX-8000VBK specifications

The JVC RX-8000VBK is a robust and versatile audio receiver that delivers exceptional sound quality and a suite of features designed to enhance any home theater experience. As part of JVC's commitment to high-performance audio solutions, the RX-8000VBK stands out with a combination of innovative technologies and user-friendly functionality.

One of the standout features of the RX-8000VBK is its impressive power output. With a robust amplifier section, it delivers 100 watts per channel across 7 channels, ensuring that even the most demanding audio tracks can be played with clarity and authority. This power enables it to drive a variety of speaker configurations, making it suitable for both small and large setups.

The RX-8000VBK supports a wide range of audio formats, including PCM, Dolby Digital, DTS, and more, providing users with the flexibility to enjoy their favorite movies and music without compromise. Its advanced digital signal processing technology enhances the listening experience by ensuring sound is reproduced accurately, maintaining the integrity of the original recording.

Connectivity is another strong point of the RX-8000VBK. It features multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. This versatility makes it easy to switch between devices without having to constantly change cables. Additionally, the receiver is equipped with optical and coaxial digital audio inputs for further connectivity options.

For those who appreciate a user-friendly interface, the RX-8000VBK does not disappoint. It comes with an intuitive remote control and an on-screen display that makes setup and navigation straightforward. The inclusion of a built-in AM/FM tuner also ensures that listeners can enjoy their favorite radio stations with clarity.

The receiver incorporates advanced room calibration technology, which helps optimize audio performance based on the specific acoustics of the listening environment. This feature adjusts speaker levels, delays, and EQ settings automatically, delivering tailored sound that suits individual spaces.

In terms of design, the JVC RX-8000VBK features a sleek and modern aesthetic, with a polished finish that complements any home entertainment setup. Its compact form factor allows it to fit neatly into AV racks and cabinets.

Overall, the JVC RX-8000VBK is a powerful audio receiver that excels in delivering rich, immersive sound for a variety of entertainment experiences. With its combination of advanced technology, connectivity options, and user-friendly features, it is a worthwhile investment for anyone looking to elevate their home audio system.