Adjusting the Front Speaker Output Balance
(Also see page 13)
1. Press MENU.
The MAIN MENU appears on the TV.
•Pressing one of the %/ Þ / @/ #buttons also displays the
MAIN MENU.
2.Press %/ Þto move to “SOUND CONTROL,” then press @/ #.
The SOUND CONTROL menu appears.
3. Press %/ Þto move |
|
to “BAL.” (Balance). |
4. Press @/ #to adjust the balance.
5.When you finish, press EXIT repeatedly until the menu disappears from the TV.
Reinforcing the Bass
(Also see page 12)
1. Press MENU.
The MAIN MENU appears on the TV.
•Pressing one of the %/ Þ / @/ #buttons also displays the
MAIN MENU.
2.Press %/ Þto move to “SOUND CONTROL,” then press @/ #.
The SOUND CONTROL menu appears.
3. Press %/ Þto move
to “BASS BOOST.” | |
|
4. Press @/ #to turn the bass boost function “ON” or “OFF.”
5.When you finish, press EXIT repeatedly until the menu disappears from the TV.
Attenuating the Input Signal
(Also see page 12)
1. Press MENU.
The MAIN MENU appears on the TV.
•Pressing one of the %/ Þ / @/ #buttons also displays the
MAIN MENU.
2.Press %/ Þto move to “SOUND CONTROL,” then press @/ #.
The SOUND CONTROL menu appears.
Adjusting the Subwoofer Output Level
(Also see page 12)
1. Press MENU.
The MAIN MENU appears on the TV.
•Pressing one of the %/ Þ/ @/ #buttons also displays the
MAIN MENU.
2.Press %/ Þto move to “SOUND CONTROL,” then press @/ #.
The SOUND CONTROL menu appears.
3. Press %/ Þto move |
|
to “SUBWFR LEVEL.” |
4. Press @/ #to adjust the subwoofer output level.
5.When you finish, press EXIT repeatedly until the menu disappears from the TV.
Adjusting the DSP Modes
(Also see pages 25 – 29)
1. Press MENU.
The MAIN MENU appears on the TV.
•Pressing one of the %/ Þ/ @/ #buttons also displays the
MAIN MENU.
2.Press %/ Þto move to “MODE.”
3.Press @/ #to select the
DSP mode you want to adjust.
• In this example, “THEATER” is selected.
4. Press %/ Þto move to “SOUND
CONTROL,” then | |
| |
press @/ #. |
|
The SOUND CONTROL |
|
menu appears. |
|
5. Press %/ Þto move to “SURROUND LEVEL,” then press
@/ #.
The SURROUND LEVEL menu appears.
3. Press %/ Þto move to “INPUT ATT.”
4.Press @/ #to turn the
Input Attenuator mode
“ATT ON” or “NORMAL.”
6. Press %/ Þto move to the item you want to set or adjust, then press @/ #.
On these adjustment menus, you can do the following:
For
“DSP EFFECT”: | Select the effect level. |
5.When you finish, press EXIT repeatedly until the menu disappears from the TV.
34