09Additional information

Use in an excessively dusty or damp environment.

Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use.

Use near a television or monitor as you may experience interferenceÑespecially if the television uses an indoor antenna.

Use in a kitchen or other room where the system may be exposed to smoke or steam.

Use on a thick rug or carpet, or cover with clothÑthis may prevent proper cooling of the system unit.

Place on an unstable surface, or one that is not large enough to support all four of the system unitÕs feet.

Glossary

Dolby Digital

A multi-channel audio encoding

 

system developed by Dolby

 

Laboratories that enables far more

 

audio to be stored on a disc than

 

PCM encoding.

Dolby

A matrix decoding technology

Pro Logic II

developed by Dolby Laboratories that

 

expands any two-channel source

 

audio, such as CDs and TV

 

broadcasts, to a five-channel

 

playback (left/center/right/left

 

surround/right surround), resulting

 

in a surround experience.

DTS

A multi-channel audio encoding

 

system developed by Digital Theater

 

Systems that enables far more audio

 

to be stored on a disc than PCM

 

encoding.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.

The Windows logo, Windows Media, Xbox 360 and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries and are used under license from Microsoft.

30

Setting up the remote to control your

TV

You can use the supplied remote to control your TV. To be able to use this feature you first have to program the remote with a maker code from the table on the following page.

ENTER

PAUSE

LIVEBACKTV

CHANNEL –

PREV NEXT VOLUME

AUDIO

 

ANGLE

PLAY MODE

 

 

TIMER REC

REC MODE

SETUP

/TUNE+

SR+ ONETOUCHCOPY

/ST

ENTER

/ST+

MENU

SOUND

/TUNETEST TONE

SLEEP

SURROUND

ADVANCED

 

TV/DVD

 

0

 

 

TV CONTROL

JUKE BOX

 

+

+

 

INPUT

CHANNEL

VOLUME

DISPLAY

 

 

RDS DISP

1Switch on your TV.

2Press and hold down the BACK button, then enter the maker code for your TV.

The following table shows which buttons on the remote correspond to which numbers.

Number

Remote

Number

Remote button

button

 

 

 

1

SETUP

6

ST+

 

 

 

 

2

TUNE+

7

SOUND

 

 

 

 

3

SR+

8

TUNE–

 

 

 

 

4

ST–

9

TEST TONE

 

 

 

 

5

ENTER

0

SLEEP

 

 

 

 

See the table on the next page for the list of maker codes. If there is more than one code given for your maker, input the first one in the list.

¥If the makerÕs name of your TV doesnÕt appear in the table, you will not be able to use this remote to control your TV.

3 Point the remote towards your TV and press TV to check that the remote works with your TV.

If the remote is set up correctly, the TV should switch off. If it doesnÕt and there is another code given for your maker, repeat step 2 with a new code.

En

Page 30
Image 30
Pioneer S-X360, SX-X360 manual Additional information, Glossary, Setting up the remote to control your