TABLE
Sense Key | Name | Comments |
0h | no sense | There is no specific sense key information to be reported for |
|
| the designated logical unit. |
1h | recovered error | The last command completed successfully with some |
|
| recovery action performed by the target. |
2h | not ready | The logical unit addressed can not be accessed. |
3h | medium error | Command terminated, unrecovered error, probably caused by |
|
| a flaw in the medium or an error in the recorded data. |
4h | hardware error | The target detected a |
|
| performing the command or during a |
5h | illegal request | An illegal parameter in the command descriptor block or in |
|
| the additional parameters supplied as data for commands. |
6h | unit attention | Removable medium changed or target was reset. |
7h | data protect | Execution of a read or write to medium command was |
|
| attempted on a protected block. |
8h | blank check | |
|
| defined end of data indication while reading. |
Bh | aborted command | Target aborted command. |
Others | not supported |
- 124 -