Error Recovery Parameters
The
1) Recovered CIRC (Cross Interleaved
An error in a block had been detected by the EDC (Error Detection Code) but the error was recovered by read retry. Number of read retries to perform is specified with the Read Retry Number (the third byte of the Error Recovery Parameter page in the Mode Select command.). In this case, L- ECC (Layered Error Correction Code) is not used.
2) Uncorrectable CIRC Error:
3) Recovered
Uncorrectable CIRC Error was found, but the error was corrected by the L- ECC during read retries.
4) Uncorrectable
Error could not be corrected by the
- 43 -