Table
ASC | ASCQ | DESCRIPTION |
21 | 00 | logical block address out of range |
24 | 00 | invalid field in CDB |
|
|
|
25 | 00 | logical unit not supported |
|
|
|
26 | 00 | invalid field in parameter list |
26 | 01 | parameter not supported |
26 | 02 | parameter value invalid |
|
|
|
26 | 03 | threshold parameters not supported |
28 | 00 | not ready to ready transition (medium may have changed) |
29 | 00 | power on, reset or bus device reset occurred |
2A | 00 | parameters changed |
|
|
|
2A | 01 | mode parameters changed |
2A | 02 | log parameters changed |
2B | 00 | copy can not execute since host can not disconnect |
|
|
|
2C | 00 | command sequence error |
2F | 00 | commands cleared by another initiator |
30 | 00 | incompatible medium installed |
30 | 01 | can not read medium - unknown format |
|
|
|
30 | 02 | can not read medium - incompatible format |
37 | 00 | rounded parameter |
39 | 00 | saving parameters not supported |
|
|
|
3A | 00 | medium not present |
|
|
|
3D | 00 | invalid bits in identify message |
3E | 00 | logical unit has not |
3F | 00 | target operating conditions have changed |
|
|
|
3F | 01 | micro code has been changed |
3F | 02 | changed operation definition |
3F | 03 | inquiry data has changed |
|
|
|
40 | 00 | diagnostic failure on component NN |
|
|
|
43 | 00 | message error |
44 | 00 | internal target failure |
45 | 00 | select or reselect failure |
|
|
|
46 | 00 | unsuccessful soft reset |
47 | 00 | SCSI parity error |
48 | 00 | initiator detected error message received |
49 | 00 | invalid message error |
|
|
|
4A | 00 | command phase error |
4B | 00 | data phase error |
4C | 00 | logical unit failed self configuration |
|
|
|
4E | 00 | overlapped commands attempted |
53 | 00 | media load or eject failed |
53 | 02 | medium removal prevented |
57 | 00 | unable to recover TOC |
|
|
|
5A | 00 | operation request or state change input (unspecified) |
5A | 01 | operator medium removal request |
5B | 00 | log exception |
|
|
|
5B | 01 | threshold condition met |
|
|
|
5B | 02 | log counter at maximum |
5B | 03 | log list codes exhausted |
63 | 00 | end of user area encountered on this track |
|
|
|
64 | 00 | illegal mode for this track |
- 126 -