Cleaning and maintenance
Areas covered with synthetic leather
Wipe these areas with a soft, dry cloth.
●Never use chemicals such as thinner, benzine, alcohol, etc.
●When using the commercially available
products (wipes), follow its instructions.water mild detergent ●If the synthetic leather is particularly dirty, wipe it in
the following manner.
①Soak a soft cloth in water or a 3% to 5% solution of mild detergent (such as dish detergent) and wring it out thoroughly.
②Dab the surface with the moistened cloth.
③Rinse the cloth in water, wring it out thoroughly, and then wipe any remaining detergent from the surface.
④Wipe the surfaces with a soft, dry cloth.
⑤Allow to dry naturally.
●If it is difficult to remove dirt, soak a commercially available Melamine foam sponge in mild detergent (such as dish detergent) and wipe the unit with it.
●Do not use a hair dryer to dry the surface more quickly.
●Since colors may transfer from clothing to the synthetic leather surface, be careful when using the unit with clothing such as jeans or colored clothes.
●Do not allow these areas to come in contact with plastic for extended periods of time as this may lead to discoloration. Also, if you use any kind of lotion, gel or cream for your hair, place a towel or some other cover over the area of contact.
Plastic area
1Wipe the unit with a cloth moistened with mild detergent (such as dish detergent) and
thoroughly wring out the cloth.
●Never use chemicals such as thinner, benzine, alcohol, etc.
2Wipe the unit with a cloth moistened with plain water
and thoroughly wring out.
●Make sure to wring tightly before wiping the controller.
3Allow the unit to dry naturally.
mild detergent
water
thinner | benzine | alcohol |
EN46
