Reclining
QThe angle of the backrest, leg rest or armrest automatically changes at times.
AThe angle automatically changes in the following cases.
①When automatic course, stretch action or manual operation are started.
The chair automatically reclines to the
massage position.
The angle does not change if the chair is already reclined to the massage position or further.
| Reclines |
Raises | around |
20° | |
around 60° |
|
②When 
is pressed to end the massage.
The chair automatically returns to the
upright position.
◦Only the leg rest returns to the original position if the massage is completed according to the
◦If 
is pressed to end the massage, all operations immediately stop and the
angle does not automatically change.
Leg rest
QWhen storing the leg rest, the leg rests stop rotating when the leg rest rotation lock release lever is released while they are rotating.
AThe leg rests are designed to stop partway for safety reasons.
◦If this happens, rotate them to the correct position.
Controller
QThe controller holder is unsteady.
ATightenscrew. the controller holder fixing
If the controller holder comes off, loosen the controller holder fixing screw, place the holder in and tighten the fixing screw again.
Controller holder
Controller holder fixing screw
Q&A/Important
Notes
▶Continued on the next page EN55
