Connect the air plugs | Panasonic EP-MA73 instruction

3

4

Connect the air plugs

①Press air plugs into the air plug sockets below the armrest until you hear a click.

	View from bottom		Before
	View from bottom
		Air plug jack	Use
Front		Air plug	Use
Front

		Protrusion
	Press until the protrusion clicks
	into place.

・Arm massage will not operate unless the air plugs are inserted securely. ②Follow the same step when connecting to the armrest on the left side.

Connect the power cord to the unit

Appliance inlet

Connector

Power cord

Power switch section

❶● Check for dirt and damage on appliance inlet of the power switch

on and the connector of the power cord.

❷● Insert the connector into the appliance inlet.

●❸ Be re to push the connector in all the ay.

GROUNDING INSTRUCTIONS

●The unit must be properly grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current in order to reduce the risk of electric shock.

●This unit is equipped with a cord with an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that has been properly installed in accordance with all local codes and ordinances.

▶Continued on the next page EN17

Image 16

Panasonic EP-MA73 manual Connect the air plugs, Connect the power cord to the unit

Contents

Operating Instructions EnglishEN3 EspañolSP3 FrançaisFR3 Contents Important Safety Instructions Safety Precautions Operating Precautions Main functions Specifications Weight in box Maximum user weight Unit dimensions Front Side Part names and functions Power cord Power plug Rating sticker Leg cover Power switch sectionBack cover Leg rest-Leg & sole massage section Part names and functions EN12 Operation display Back intensity displaySee page EN29 Where to use the unit Setting up the massage loungerController Removing everything from the box and installing the unit Hold onto the sides Assembly How to tighten the screwsAttachment screws positions Insert the armrest into the unit Connect the power cord to the unit Connect the air plugs Assembly Insert the power plug into ❶ power outletPlacing the controller Into e controller Stand Fasten the pillow and the comfort cushion When the controller stand is attached on the left sidePper Before sitting down Check the surrounding area Check the power cord and the power plug Switching on the power supply Before sitting down（） Check the unitMake sure there are no tears or rips in the fabric ❷ Make sure there is no foreign matter between the unit Adjust the pillow position Adjust the controller standHorizontal orientation can be adjusted Remove the pillow ❶ Press to turn ❷ Select function massage. the power on Simple useStretch Action Select one from To adjust to your preferences When you want a complete massage ❶ Press to turn on the powerPress one of the buttons With your head on the pillow To adjust the shoulder position during the tapping action Body scanning is completed when the tapping action finishes Fine adjustment of the position When performing a massage on shoulderHand/arm, lower back or leg/foot Adjust by pressing To repeat the current massage To adjust the back intensity To adjust the amount of sliding of the sole massage sectionTo turnHeatmassage heads andFoot HeatOn and Off You can turn on/off theHeatmassage Heads by pressing When the registration is completed Contents that can be registeredIf there is another setting already To register your preferences Power To delete the registered settings ExampleTo start the registered program ❶ Press About theHeatmassage heads/Foot Heat To turnHeatmassage heads OnTo turnFoot HeatOn To turnHeatmassage heads Off To turnHeatmassage heads/Foot Heatoff each time ❷ Select the body part you want to massage ❸ Select action you prefer ❹ Press to start the action Body scanning for manual operationTo change an action in the middle of a massage If you want to massage with tapping action only Using air massage together It can be adjusted with Adding tapping actions to the current operation Adjusting the back intensityTurning theHeatmassage head and Foot HeatOn and Off Select the body Massage For a person with large body dimensions Press the button Operation of the Hand / ARM Ultra knead on palms massage Alternates Operation of the Shoulder massage Operation of the Lower Back massage Operation of the HIP stretch Operation of the Neck stretchOperations of the LEG stretch When you want to adjust the reclining angle and/or leg rest Press to turn on the power After completing the massage Disconnecting the powerReturning to normal chair position If you experience any problems Timer functionInterrupting the massage Areas covered with synthetic leather Cleaning and maintenancePlastic area Dry cleaning How to attachSeat fabric Sole covers can be removed and washed Moving the unit Moving by lifting it with 2 or more persons How to remove the armrest Using the castors to move the unitIt is easier to move with the armrest removed About the automatic course/action/voice guidance function Overview of the automatic course Adjusting the voice guidance volume Off Soft Medium Loud Usage situation Usage methodIs it possible to massage only the upper body or legs? Massaging only the upper body How does body scanning work? Body scanningShoulder position is detected by the following mechanism There is a delay in movement when adjusting the position Upper body massageHand & arm massages Operating sounds during air Massage Reclining Leg restController Controller holder is unsteady Noise grows louder after using the chair for a long time Is there a timer function?Take the following precautions Other Troubleshooting Problem Cause and Remedy Problem Troubleshooting（）Sounds and sensations of the unit Error display Error display Contents Panasonic Corporation of North America